Cooling Water recooler
2 - 85 kWBack to List
Standard equipment
 | Water level control |
| Stainless steel frame |
| Stainless steel coil evaporator |
| Chiller IP 54 |
| Operating temp. 37° C max. ambient |
| High tech scoll compressor / low noise |
| High efficiency air cooled condensor |
| Digital thermostat hysteresis +/- 1,0 K |
| Refrigerant circuit with TÜV approved low and high pressure switch |
| By-Pass valve |
| Draining through water level control |
| All systems with control transformer. no neutral required |
| Environment friendly refridgerant R407C |
| CH-pump with carbide / carbide shaft seal |
| Panels in RAL colour on request |
Options
| DC voltage - control circuit |
| Drain valve for tank |
| Water outlet manometer |
| Water level switch for pump-protection |
| Winter start up regulation (0 - 50 - 100%) |
| Common alarm (potential free) |
| Special voltage |
| Flow switch |
| Common alarm (potential free) |
| Water set point +40° C max. |
| Hand shut off valve between tank and pump |
| Wire labelling |
| Harting connectors / plugs |
| Refrigerant R 134 A |
| Non return valve + magnetic valve |
| Hysteresis +/- 0,3 K |
| Air filter |
| Stop process with low/high temperature alarm |
| CR-pump for pressure above 3 bar with carbide / carbide shaft seal |
| Stainless steel piping |
| Operating temperature > 37° C ambient |
Back to List